Thank you for your trust in us and for buying the new Tower 1. We hope you enjoy it.
Listen to your music and make the most of your music thanks to its wireless connection. This new sound tower features Bluetooth 4.1. technology and has a 3.5 mm audio-in and RCA connections for your external devices.
We recommend you to read this manual in order to enjoy your device safely and with maximum performance.
Care and maintenance
Do not expose your Tower 1 to impacts, dust, humidity or high temperatures.
Do not use neither corrosive nor abrasive cleaning products.
Keep the device clean and free of dust using a soft and dry cloth.
Please do not dismantle the device. All repairs should be done exclusively by qualified staff of Energy Sistem Technology, S.A.
- Please make sure that your Tower 1 is off if you are not using it.
- Stereo sound system with 30 W power.
- Wireless connectivity: Bluetooth V.4.1. Class II. 2.4 GHz
- Bluetooth profiles®: A2DP; AVRCP
- Up to 10 meters range for Bluetooth® devices connection
- 30 W power:
- Frequency response: 60Hz ~ 18 KHz.
- 2-band analog equalizer with manual adjustment option.
- Wooden cabinet speakers.
- Backlit-LED top panel.
- Audio-in for 3.5 mm jack (analog stereo input)
- RCA audio-in (analog stereo input)
- Power supply: 120 - 240 V / 50 - 60 Hz
- Tower 1
- 3.5 mm jack cable
- RCA cable
1. LED indicator
4. Play - Pause
5. Change mode
6. Volume +
7. Volume -
8. RCA audio-in (AUX)
9. 3.5 mm audio-in
In the rear panel of your Tower 1 you will find:
- Tower 1 power switch with two positions (indicated as "ON" - "OFF")
- Two power controllers for high and low frequencies (shown as "TREBLE" and "BASS").
- 120-240 V power cable.
- Product serial number.
Switching on and off the device. Stand-by mode.
Once the Tower 1 has been plugged into a socket, turn it on by moving the power switch on the back side of the tower to the "ON" position. At that moment, you can switch it on and off by keeping the Play - Pause (4) button on the top panel pressed for 2 seconds.
If you are not going to use the tower for a long period of time, we recommend, not only to switch it off from the top panel but also to turn the power switch to the "OFF" position.
Once switched on, press Change mode (5) and select Bluetooth mode. Then, the LED mode indicator (1) on the top panel will start glowing. This will be the default mode every time you switch on your tower.
When the LED mode indicator (1) starts flashing in blue, your tower will be ready to be synchronized with your Bluetooth device.
Press "connect" when you see the name "Tower 1" in your Bluetooth device's display. The devices will be connected immediately and without codes. You will hear a confirmation sound when both devices are synchronized.
As soon as the connection is set, you will be able to play your track list in wireless mode.
If you want to synchronize another device, keep the Change mode (5) button pressed for 2 seconds to start a new search. You can also switch Bluetooth mode off and then switch it on again by pressing the Change mode (5) button repeatedly and shortly.
Furthermore, your Tower 1 features both Bluetooth A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio Video Remote Control Profile) profiles. The former will let you listen to your music in stereo mode and the latter will allow you to control the playback with the top panel buttons.
Once your Tower 1 is synchronized with other device, you can control the volume from the tower itself. To do so, press Volume + (6) or Volume - (7). If you reach the maximum volume permitted, you will hear that the music playback suddenly stops.
To start, pause or resume playback, press the Play - Pause (4) button.
To move to the previous or the following track, press Next (2) or Back (3).
RCA audio-in (AUX)
Your Tower 1 features an RCA audio-in (8) (AUX) which allows you to connect your music player using the 3.5 mm jack to RCA cable provided with the product.
This audio-in is situated in the top panel, with the name "Aux1". It is a RCA stereo audio-in. This input has been conceived to connect your TV or music system permanently. You will be able to enable and disable the use of these inputs through the Change mode (5) button.
To use this function, connect the RCA cable end (L and R) to the stereo audio-in (8) (L and R respectively) and the 3.5 mm jack cable end to the audio-out of the device you want to use (MP3, laptop, smartphone, etc).
Press Change mode (5) and select "Aux1" mode while your Tower 1 is on. The LED MODE INDICATOR (1) on the top panel will show the selected mode.
When the "Aux1" playback mode is enabled, your Tower 1 is in speaker mode. This means that the content played by your audio device (external player) as well as all volume, equalizer or track changes will be heard through the Tower 1.
To start, pause or resume playback use the Play - Pause (4) button.
Keep in mind that you will not be able to change the track with the Next (2) and Back (3) buttons while the auxiliary audio-in is in use. Instead, you must do it through the audio device (external player) connected.
3.5 mm audio-in (AUX)
Your Tower 1 features an 3.5 mm audio-in (AUX) (9) which allows you to connect your music player using a 3.5 mm jack audio cable.
This audio-in is situated in the top panel, with the name "Aux2". To use it, connect one end of the 3.5 mm to 3.5 mm jack audio cable to the audio-in (9) and the other end to the device audio-out (MP3 player, laptop, smartphone, etc).
Press Change mode (5) and select "Aux2" mode while your Tower 1 is on. The LED mode indicator (1) on the top panel will show the selected mode.
When the "Aux2" playback mode is enabled, your Tower 1 is in speaker mode. This means that the content played by your audio device (external player) as well as all volume, equalizer or track changes will be heard through the Tower 1.
To start, pause or resume playback use Play - Pause (4) button.
Keep in mind that you will not be able to change track with the Next (2) and Back (3) buttons while the auxiliary audio-in is in use. Instead, you must do it through the audio device (external player) connected.
Energy Sistem Technology, S.A. is liable for any lack of conformity that exists at the time the goods are purchased during a period of 36 months. Batteries are excluded from the 36-month warranty, having a warranty period of 12 months.
This warranty covers any defects in workmanship or materials. This warranty does not cover any product failure due to accidents, misuse or alteration made by an unauthorized person.
The special 36-month warranty is valid for the European Union. For other countries please refer to the specific legislation or your local distributor.
Please visit http://www.energysistem.com/en/support and select your product to view the FAQ (Frequently Asked Questions), user manual, quick guide, drivers and updates available, submit a query to Technical Support Service or manage the warranty.
You can also contact the distributor that sold the product by presenting the purchase receipt or invoice.
Important: This warranty does not cover any damage or loss of data stored in warranty products. Therefore, Technical Service of Energy Sistem Technology, S.A. will not assume any loss of the above mentioned information. In this respect it is recommended that you make a backup of your data and remove any personal data from the product's internal memory before you send it or send the device with the original data only.
Specifications are subject to change without notice.
Trademarks All company, brand and product names are trademarks or registered trademarks of their respective companies.
©2016 by Energy Sistem®. All rights reserved.
Declaration of conformity
Issuer's name: Energy Sistem Technology, S.A. - CIF: A53107488
Address: C/ Calpe, 1 - 03509 Finestrat - Alicante (Spain)
Tel: + 34 966 83 03 24
We declare under our own exclusive responsibility that the product
Description: Sound tower
Brand: Energy Sistem
Model: Tower 1
Manufacturer: Energy Sistem Technology, S.A.
Manufacturing Country: China
referred to in this declaration is in compliance with the essential norms and standards
in conformity with the essential norms and standards of the Directives 2014/30/EU and 2014/35/EU of the European Parliament and the Council of 9th March 1999.
Finestrat, 1st September 2016.
Product Management Director