Accumulate Energies and get discounts for your purchases in our online shop.

Free shipping +50€.

Select language

Introduction

  • Thank you for your trust in our company and for buying the new Headphones BT Smart 6 Voice Assistant. We hope you enjoy them.
  • We recommend you to read this manual in order to enjoy your device safely and with maximum performance.

Care and maintenance

  • Do not expose your Headphones BT Smart 6 Voice Assistant to impacts, dust, humidity or high temperatures.
  • Do not use neither corrosive nor abrasive cleaning products.
  • Keep the headphones clean and free of dust using a soft dry cloth.
  • Do not disassemble your headphones. All reparation works should be carried out exclusively by qualified staff of Energy Sistem Technology, S.A.
  • Do not leave the battery completely discharged for a long period of time.

Features

  • Headphones that work with your smartphone's voice assistant to easily select smartphone functions.
  • Bluetooth 4.2® to play music wirelessly.
  • Rechargeable lithium-polymer battery with up to 23 hours of battery life.
  • Rotating ear pad system to enjoy even more comfort.
  • If you prefer to use the cable to play music or you don't want to use the battery of your headphones, plug them into the device using the audio cable.

Technical specifications

  • CONNECTIVITY
  • Bluetooth: 4.2
  • Range: 10 m
  • Operating frequencies: 2.4 GHz
  • Maximum output signal: < 20 dBm
  • Assistant that is compatible with Google/ Siri

  • DRIVERS:
  • Neodymium magnet
  • Frequency response: 20 - 20000 Hz
  • Driver diameter: 40 mm
  • Sensitivity: 105 ± 3 dB/mW (@1 KHz)
  • SPL: 115 ± 3 dB
  • Maximum power: 20 mW
  • Design: Closed design
  • Type: Dynamic
  • Impedance: 32 ohms
  • THD < 1%

  • CABLE
  • Length: 120 cm
  • Connector: 3.5 mm mini jack

  • MICROPHONE:
  • Sensitivity: -42 dB ± 3 dB (@1 kHz)

  • BATTERY:
  • Capacity: 400 mAh
  • Type: Li-Po
  • Battery life:
    • Battery life @ 50% volume: 23 hours
    • Battery life @ 70% volume: 18 hours
    • Battery life @ 100% volume: 14 hours
  • Charging port: microUSB (type B)
  • Charging time: < 3 hours

  • OTHER FEATURES

  • MicroUSB charging cable

Product content

  • Headphones BT Smart 6 Voice Assistant
  • MicroUSB charging cable
  • Audio cable
  • Quick guide

Buttons and ports

  1. STATUS INDICATOR
  2. MULTIFUNCTION BUTTON
  3. VOLUME +/ NEXT
  4. VOLUME -/ BACK
  5. CHARGING PORT
  6. AUDIO INPUT
  7. MICROPHONE
  8. ASSISTANT BUTTON
  9. ANC INDICATOR

Main functions

Switching on and off the device

To turn on your Headphones BT Smart 6 Voice Assistant, press and hold the MULTIFUNCTION BUTTON (2) for 2 seconds. You will hear a confirmation sound and the STATUS INDICATOR (1) will glow blue. The STATUS INDICATOR (1) will keep flashing blue while your Headphones BT Smart 6 Voice Assistant are on. To turn off your Headphones BT Smart 6 Voice Assistant, press and hold the MULTIFUNCTION BUTTON (2) for 2 seconds. You will hear a sound when turning off the headphones.

Charging the battery

When the battery level is below 10%, the STATUS INDICATOR (1) will flash red and you will hear a sound to remind you to charge the battery.

The STATUS INDICATOR (1) will glow red while charging the device and will turn blue once the charging process has been completed. Plug the microUSB end of the USB cable provided to the CHARGING PORT (5) of your headphones and the other USB end to any device with an USB charging port that provides energy (PC, USB wall charger, car charger, etc) to charge the battery. The charging time is approximately 3 hours.

Important considerations:

  • Do not store or leave your device unused or completely discharged for a long period of time.

Bluetooth pairing

Once your Headphones BT Smart 6 Voice Assistant are off, press and hold the MULTIFUNCTION BUTTON (2) for approximately 4 seconds, until the STATUS INDICATOR (1) starts flashing red and blue. At this point, your headphones and your Bluetooth device can be paired. Once "Headphones Smart 6" appears on your devide screen, press "connect". You will hear a sound that confirms that both devices have been paired correctly.

If you previously paired your Headphones BT Smart 6 Voice Assistant with a device, they will connect automatically next time you turn them on. In case that you want to pair them with another device, repeat the pairing process (press and hold the MULTIFUNCTION BUTTON (2) for 4 seconds).

Bluetooth playback control

Once your Headphones BT Smart 6 Voice Assistant are syncronized, you will be able to control basic playback functions such as turning up and down the volume and switching to the next or previous song directly from your headphones.

Press VOLUME + (3) and VOLUME - (4) to turn the volume up and down respectively. You will hear a sound when reaching the maximum and minimum volume levels.

Press and hold NEXT (3) to switch to the next song. You can also press and hold BACK (4) to go back to the previous song.

Press the MULTIFUNCTION BUTTON (2) once to pause or resume playback.

  • If you are using the audio cable instead of the Bluetooth connection, you will have to use your music player to control music playback and not the headphones.

Call control

Once your Headphones BT Smart 6 Voice Assistant and smartphone are synchronized, you will be able to answer calls thanks to the built-in MICROPHONE (6) while wearing your headphones.

Press the MULTIFUNCTION BUTTON (2) to answer an incoming call. If you are listening to music when you receive a call, playback will pause and you will hear an incoming call sound. Press and hold the very same button for 2 seconds to reject an incoming call.

Press the MULTIFUNCTION BUTTON (2) again to end a call. Playback will resume from the point when the music stopped.

Voice Assistant

Your Headphones BT Smart 6 Voice Assistant feature an ASSISTANT BUTTON (8) that allows you to directly activate your smartphone's assistant.

This function will activate your smartphone's digital assistant and will let you use voice commands to perform tasks naturally and easily.

Please take a look at the images below to see a list of all the tasks that you can perform:

Please take into account that the ASSISTANT BUTTON (8) activates your smartphone's voice assistant and depends on it to perform actions. You can also take a look at Google Assistant and Siri user guides, available on their manufacturers' websites.

Audio input

If you don't want to use the Bluetooth connection, you can also connect your Headphones BT Smart 6 Voice Assistant to your music player using the audio cable provided. You don't need to switch your headphones on if you want to use the audio cable.

Simply plug one cable end into the AUDIO INPUT (6) and the other end to your music player to enable this mode.

  • If you are using the audio cable instead of the Bluetooth connection, you will have to use your music player to control music playback and not the headphones.
  • *Please take into account that the Voice Assistant feature will not be available if you're using the audio cable.

Warranty

Energy Sistem Technology, S.A. is liable for any lack of conformity that exists at the time the goods are purchased during a period of 36 months. Batteries are excluded from the 36 month warranty, having a warranty period of 24 months. This warranty covers any defects in workmanship or materials and does not cover any product failure due to accidents, misuse or alteration made by an unauthorized person.

The special 36 month warranty is valid for the European Union. For other countries please refer to your specific legislation or your local distributor.

Warranty procedure

Please visit www.energysistem.com/en/support and select your product to view the FAQ (Frequently Asked Questions), user manual, quick guide, drivers and updates available as well as to submit a query to our Technical Support or manage the warranty. You may also contact the distributor that sold the product by presenting the purchase receipt or invoice.

Trademarks

All company, brand and product names are trademarks or registered trademarks of their respective companies. Specifications are subject to change without notice.

© 2018 by Energy Sistem Technology, S.A. All rights reserved.

Declaration of conformity

Issuer?s name: Energy Sistem Technology, S.A.
Address: C/ Calpe, 1 - 03509 Finestrat, Alicante (Spain)
Tel: +34 966 830 324
CIF: A53107488

We declare under our own exclusive responsibility that the product:

  • Description: Wireless headphones
  • Brand: Energy Sistem
  • Model: Headphones BT Smart 6 Voice Assistant
  • Manufacturer: Energy Sistem Technology, S.A.
  • Manufacturing country: China

referred to in this declaration is in compliance with the essential norms and standards

EN 60065:2014 (Eight Edition)
EN 62479:2010
ETSI EN 301 489-01 V2.1.1 (2017-02)
ETSI EN 301 489-17 V3.1.1 (2017-02)
EN 300 328 V2.1.1 (2016-11)

in conformity with the provisions of the Directive 2014/53/EU of the European Parliament and of the Council of 16th April 2014.

Finestrat, 1st July 2018

Imagen1

Marco Antonio Velázquez Fierro
Product Management Director