Accumulate Energies and get discounts for your purchases in our online shop.

Free shipping +50€.

Select language

Introduction

  • Thank you for your trust in our company and for buying the new Headphones BT Urban 3. We hope you enjoy them.
  • We recommend you to read this manual in order to enjoy your device safely and with maximum performance.

Care and maintenance

  • Do not expose your Headphones BT Urban 3 to impacts, dust, humidity or high temperatures.
  • Do not use neither corrosive nor abrasive cleaning products.
  • Keep the headphones clean and free of dust using a soft dry cloth.
  • Do not disassemble your headphones. All reparation works should be carried out exclusively by qualified staff of Energy Sistem Technology, S.A.
  • Do not leave the battery completely discharged for a long period of time.

Features

  • Deep and powerful bass that will make you vibrate with each song.
  • Wireless headphones with Bluetooth 4.2 technology.
  • Turn the volume up or down. Switch to the next or previous track. Playback control from the device.
  • If you run out of battery use the audio cable to plug your headphones into your music player. Don't let the music stop.
  • Metal finishes and comfortable ear pads.
  • Lithium-polymer battery with up to 13 hours of battery life.

Technical specifications

  • DESIGN:
  • Comfortable ear pads
  • Metal finishes

  • CONNECTIVITY
  • Bluetooth: 4.2
  • Range: 10 m
  • Supported Bluetooth protocols: HSP / HFP / A2DP / AVRCP
  • Operating frequencies: 2.4 GHz
  • Maximum output signal: < 20 dBm

  • DRIVERS:
  • Frequency response: 20 - 20,000 Hz
  • Driver diameter: 40 mm
  • SPL: 116 ± 3 dB
  • Maximum power: 30 mW
  • Closed design
  • Type: dynamic
  • Impedance: 32 ohms
  • THD < 1%

  • CABLE
  • Length: 120 cm
  • Connector: 3.5 mm mini jack

  • MICROPHONE:
  • Sensitivity: -42 dB ± 3 dB (@1 KHz)

  • BATTERY:
  • Capacity: 300 mAh / 3.7 V
  • Type: Li-Po
  • Battery life:
  • Battery life if volume is at 50%: 13 hours*
  • Charging port: microUSB Type-B
  • Charging time: 3 hours

  • OTHER FEATURES
  • Audio cable
  • MicroUSB charging cable

*Approximate battery life. This value depends on the selected volume level and the type of music you play.

Compatible with most popular smartphones on the market.

Product content

  • Headphones BT Urban 3
  • MicroUSB cable
  • Audio cable
  • Quick guide

Buttons and ports

  1. MULTIFUNCTION BUTTON
  2. BACK
  3. VOLUME -
  4. NEXT
  5. VOLUME +
  6. STATUS INDICATOR
  7. CHARGING PORT
  8. AUDIO-IN
  9. MICROPHONE

Main functions

Switching on and off the device

To switch on your Headphones BT Urban 3, press and hold the Multifunction button (1) for 3 seconds. You will hear a confirmation sound. The Status indicator (6) lights up blue and keeps flashing while your Headphones BT Urban 3 are on. To switch off your Headphones BT Urban 3, press and hold the Multifunction button (1) for 3 seconds. You will hear a sound when switching off the headphones.

Charging the battery

When the battery level is below 10%, the Status indicator (6) flashes red. You will also hear a sound to remind you to charge the battery.

The Status indicator (6) glows red while charging the device and turns blue once the charging process has been completed. Plug the microUSB end of the USB cable provided to your headphones' Charging port (7) and the other USB end to any device with an USB charging port that provides energy (PC, USB wall charger, car charger, etc) to charge the battery. The charging time is approximately 3 hours.

Battery life

Volume Low (25%) Medium (50%) High (75%) Maximum (100%)
15 hours 13 hours 12.5 hours 12 hours

Important considerations:

  • Do not store or leave your device unused or completely discharged for a long period of time.

Bluetooth pairing

Once your Headphones BT Urban 3 are off, press and hold the Multifunction button (1) for approximately 4 seconds, until the Status indicator (6) starts flashing red and blue. At this point, your headphones and your Bluetooth device can be paired. Once "Headphones BT Urban 3" appears on your source devide screen, press "connect". You will hear a sound to confirm that both devices have been paired correctly.

If you previously paired your Headphones BT Urban 3 with a source device, they will synchronize with it automatically. If you want to pair them again, press the Multifunction button (1) twice. You will hear a confirmation sound and the lights will flash red and blue. At this point, your device can be paired once again.

Auto power off

Your Headphones BT Urban 3 Bluetooth will automatically turn off in the following situations:

  • After 5 minutes in search mode, if they are not synchronized with another device.
  • After 30 minutes, if they are synchronized and music is paused.

Wireless playback control

Once your Headphones BT Urban 3 are syncronized, you will be able to control basic playback functions such as turning up and down the volume and switching to the next or previous song directly from your headphones.

Press Volume + (5) or Volume - (3) to turn the volume up or down. You will hear a sound when reaching the maximum and minimum volume levels.

Press Next (4) to switch to the next song. You can also press and hold Back (2) to go back to the previous song.

Press the Multifunction button (1) once to pause or resume playback.

  • If you are using the audio cable instead of the Bluetooth connection, you will have to use your music player to control music playback and not the headphones.

Call control

Once your Headphones BT Urban 3 and smartphone are synchronized, you will be able to answer calls thanks to the headphones' built-in Microphone (9).

Press the Multifunction button (1) to answer an incoming call. If you are listening to music when you receive a call, playback will pause and you will hear an incoming call sound. You can also press and hold this button for 2 seconds to reject an incoming call.

Press the Multifunction button (1) once again to end a call. Playback will resume from the point when the music stopped.

Audio input

If you don't want to use the Bluetooth connection, you can also connect your Headphones BT Urban 3 to your music player using the audio cable provided. You don't need to switch on your headphones if you want to use them in this mode.

Simply plug one cable end into the Audio input (8) and the other end to your music player to enable this mode.

  • If you are using the audio cable instead of the Bluetooth connection, you will have to use your music player to control music playback and not the headphones.

Warranty

Energy Sistem Technology, S.A. is liable for any lack of conformity that exists at the time the goods are purchased during a period of 36 months. Batteries are excluded from the 36 month warranty, having a warranty period of 24 months. This warranty covers any defects in workmanship or materials and does not cover any product failure due to accidents, misuse or alteration made by an unauthorized person.

The special 36 month warranty is valid for the European Union. For other countries please refer to your specific legislation or your local distributor.

Warranty procedure

Please visit www.energysistem.com/en/support and select your product to view the FAQ (Frequently Asked Questions), user manual, quick guide, drivers and updates available as well as to submit a query to our Technical Support or manage the warranty. You may also contact the distributor that sold the product by presenting the purchase receipt or invoice.

Trademarks

All company, brand and product names are trademarks or registered trademarks of their respective companies. Specifications are subject to change without notice.

© 2018 by Energy Sistem Technology, S.A. All rights reserved.

Declaration of conformity

Issuer’s name: Energy Sistem Technology, S.A.
Address: C/ Calpe, 1 - 03509 Finestrat, Alicante (Spain)
Tel: +34 966 830 324
CIF: A53107488

We declare under our own exclusive responsibility that the product:

  • Description: Wireless earphones
  • Brand: Energy Sistem
  • Model: Headphones BT Urban 3
  • Manufacturer: Energy Sistem Technology, S.A.
  • Manufacturing country: China

referred to in this declaration is in compliance with the essential norms and standards

EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EN50332-1:2013
EN50332-2:2013
EN301 489-1 V2.2.0
EN301 469-17 V2.2.0
EN300 328 V2.1.1
EN62479:2010

in conformity with the provisions of the Directive 2014/53/EU of the European Parliament and of the Council of 16th April 2014.

Finestrat, 1st September 2018

Imagen1

Marco Antonio Velázquez Fierro
Product Management Director