Free shipping +50€

Select language


Thank you for your trust in our company and for buying the new Frame Speaker. Before you start using your speaker, we strongly recommend to read this manual to get used to it.

Care and maintenance

Please take into account the following considerations in order to avoid any product damage:

  • Do not use neither corrosive nor abrasive cleaning products.

  • Do not disassemble the device. All repair works should be carried out exclusively by qualified staff of Energy Sistem Technology, S.A.

  • Turn it off when you are not using it and do not let it completely discharged for a long time.

Technical specifications


  • Sound system: 2.1 stereo system
  • Power: 50 W
  • 2 mid-range speakers: 10 W, 2"
  • 1 subwoofer: 30 W, 4"
  • Bass reflex
  • Frequency response: 85 Hz ~ 16 KHz
  • THD < 1%
  • S/N ratio: > 90 dB

Wireless connection

  • Bluetooth 5.0, class II
  • Frequency band: 2.4 GHz
  • Maximum output signal: <20.00 dBm
  • Supported Bluetooth protocols: HFP / A2DP / AVRCP
  • Up to 10 m distance range
  • True Wireless Stereo (TWS) Technology with a distance range of up to 10 m

FM radio

  • Built-in antenna
  • FM frequency band: 87.5 ~ 108 MHz

MicroSD and USB player

  • MicroSD and USB decoder: reads MP3/ WAV/ WMA files stored on external storage units (up to 128 GB) with FAT/ FAT32 file system.

TWS compatible with

  • Frame Speaker

Power supply

  • 5 V/2 A microUSB
  • Device connector: microUSB
  • Power cable length: 150 cm

Built-in battery

  • Capacity: 4400 mAh/ 7.4 V
  • Type: Li-Ion
  • Battery life @ medium volume level: 20 hours*
  • Charging time: 7 hours
  • Charging method: microUSB

  • This value is approximate. Battery life depends on the selected volume level and type of music.

Other features

  • Remote control with up to 10 meters range
  • Wooden cabinet speaker

Product content

  • Frame Speaker
  • Remote control
  • USB Type-A to microUSB cable
  • Quick guide

General overview


1. USB playback port
2. MicroSD slot
3. LED mode indicator
4. On/ Off/ Play/ Pause
5. Volume +/ Next
6. Volume -/ Back
7. Change function
8. LED charge indicator
9. MicroUSB charging port
10. IR emitter
11. Enter/ Exit Standby mode
12. Change function
13. Play/ Pause
14. Back
15. Next
16. Volume +
17. Volume -
18. Mute
19. True Wireless pairing
20. Playback modes

Switching on and off the device

Press and hold the On/ Off button (4) for 2 seconds to turn on the device. You will see that the LED mode indicator (3) lights up. You will also hear a confirmation sound when switching on the device.

Press and hold the On/ Off button (4) for 2 seconds to turn off your device. You will hear a confirmation sound. At this point the LED mode indicator (3) switches off.

If you press the On/Off button on the remote control, the LED mode indicator (3) will blink red. This means the speaker has gone into "Standby" mode. You won't be able to turn the device on and off using the remote control. Please take into account that this mode uses up your speaker's battery. The device will automatically shut down after 30 minutes.

Charging the battery

When the battery level is below 10%, you will hear a sound to remind you to charge it. Please plug the power adapter (not included) into the Charging port (9) of your Frame Speaker. Plug then the other end into your home power socket. The Charge indicator (8) lights up and switches off once the charging process has been completed. The charging time is approximately 7 hours.


  • Turn off the device before charging it to optimise the charging process.
  • Do not leave your Frame Speaker completely discharged for a long time.
  • Use a 5 V charger with at least 1.5 A output or more to optimise the charging time.

Playback modes

Press the Change function button (7) to select one of the following playback modes:

Bluetooth - microSD - USB - FM Radio

The LED mode indicator (3) will light up as follows: blue for Bluetooth, red for FM Radio and violet for microSD and USB mode.


Once Bluetooth mode is enabled, press and hold the Change function button (7) for 2 seconds to start searching for Bluetooth devices. Access the list of available devices on your smartphone or tablet and once there, select your "Frame Speaker". The devices will be connected without codes. Once the connection has been established, you will hear a confirmation sound.

At this point, you will be able to start music playback on your smartphone or tablet. The Bluetooth wireless connection range is up to 10 meters.

Press Next (5), Back (6) and Play/ Pause (4) on the speaker to control music playback.

Your speaker saves the last connected device and pairs with it automatically when you turn on the speaker once again.

Press and hold once again the Change function button (12) for 2 seconds to start a new Bluetooth search and pair your speaker with a different smartphone or tablet.

True Wireless Stereo

This technology allows you to wirelessly pair another Frame Speaker within a maximum distance of 10 m to increase power.

Switch on both devices and enable Bluetooth mode. Do not pair your smartphone or tablet yet. Quickly press the Change Function button (12) twice, or the True Wireless Pairing button (19) on the remote control. At this point, you will see the LED mode indicator (3) blinking fast, until both speakers are paired.

Once the speakers are paired, volume adjustment will apply to both units. Quickly press the Change function button (12) twice or the True Wireless pairing button (19) on the remote control to end the TWS connection. TWS pairing may only be selected when Bluetooth mode is enabled. If you select another mode on any of both speakers, the connection will end.

USB and microSD playback

Play .mp3, .wav and .wma files stored on your microSD cards and USB sticks (up to 128 GB). The contents play automatically a few seconds after inserting the microSD card or USB stick.

If you turn off the speaker or remove the storage unit, the internal memory will save the moment when you paused playback. If you connect the same removable storage unit once again, playback will resume and the last song that you listened to will be then played.

Press Next (5) or Back (6) to move to the next or previous track.

The folders and files of your removable cards or sticks will be read in chronological order.

Browsing folders

Press and hold the Change function button (7) for 2 seconds to move to the next memory card folder.

FM radio

Once FM radio mode is enabled, press and hold the Change function button (7) for 2 seconds to start searching for FM radio stations. The process may take a few minutes. Once the search has been completed, press and hold Next (5) or Back (6) to select the radio station you want to hear from all saved radio stations.

If you place the speaker somewhere else, you will have to carry out a new search to obtain a proper radio wave reception.

Your Frame Speaker saves the last selected radio station when you turn it off and on once again.

Battery life

The battery life of your Frame Speaker depends on the selected volume level and the type of music. Please take a look at this comparative table to find out more about the approximate battery life of your device:

22 hours 20 hours 14 hours 5 hours



Energy Sistem Technology, S.A. is liable for any lack of conformity that exists at the time the goods are purchased during a period of 36 months. Batteries are excluded from the 36 month warranty, having a warranty period of 24 months.

This warranty does not cover any product failure due to accidents, misuse or alteration made by an unauthorized person.

The special 36 month warranty is valid for the European Union. For other countries please refer to your specific legislation or your local distributor.

Warranty procedure

Please visit and select your product to view the FAQ (Frequently Asked Questions), user manual, quick guide, drivers and updates available as well as to submit a query to our Technical Support or manage the warranty.

You may also contact the distributor that sold the product by presenting the purchase receipt or invoice.

Important: This warranty does not cover any damage or loss of data stored on warranty products. Therefore, Energy Sistem?s Technical Support will not assume any loss of the above mentioned information. In this respect it is recommended that you make a backup of your data and remove any personal data from the product's internal memory before you send it or send it only with the original data.
Specifications are subject to change without notice.

Trademarks. All company, brand and product names are trademarks or registered trademarks of their respective companies.

© 2019 by Energy Sistem Technology, S.A. All rights reserved.

Declaration of conformity

Issuer?s name: Energy Sistem Technology, S.A. - CIF: A53107488
Address: C/ Calpe, 1 - 03509 Finestrat - Alicante (Spain)
Tel: + 34 966 830 324

We declare under our own exclusive responsibility that the product

Description: Portable wireless speaker
Brand: Energy Sistem
Model: Frame Speaker
Manufacturer: Energy Sistem Technology, S.A.
Manufacturing country: China

referred to in this declaration is in compliance with the essential norms and standards

EN 60065 : 2014
EN62479 : 2010
EN301 489-1 V2.1.1 : 2017-02
EN301489-17 V3.1.1 : 2017-02
EN300328V2.1.1 : 2016-11

in conformity with the provisions of the Directive 2014/53/EU of the European Parliament and of the Council of 16th April 2014.

Finestrat, 01st February 2019.


Daniel Havillio
Product Management Director