- Thank you for trusting our company and buying the new Smart Speaker Wake Up. We hope you enjoy the product.
- Alarm clock redefined to wake up every day listening to the news, the weather forecast or your favourite music with Alexa. All this without touching your smartphone. It also features a Qi charging system to fully charge your smartphone battery.
- Before you start using your Smart Speaker Wake Up we strongly recommend reading this manual to get used to it.
Care and maintenance
- Do not expose your Smart Speaker Wake Up to impacts, dust, humidity or high temperatures.
- Use neither corrosive nor abrasive cleaning products.
- Do not disassemble the device. All repair works should be carried out exclusively by qualified staff of Energy Sistem Technology, S.A.
- Speaker with radio alarm function, wireless charger and voice assistant.
- Enjoy all the possibilities offered by Amazon Alexa in this speaker featuring alarm clock that delivers 2.0 stereo sound.
- 10 W power and bass enhancement system consisting of a passive membrane for crystal clear, high quality sound.
- Clock speaker with Qi standard wireless charging system.
- Large display for perfect viewing in all lighting conditions and adjustable brightness.
- Stream any song from your smartphone to the speaker wirelessly via Bluetooth.
- Play music across several speakers thanks to Bluetooth connectivity and create your own multiroom system.
- Snooze function and alarm repetition every 10 minutes (Snooze).
- In addition, you can play your music using the 3.5 mm jack audio-in.
- Sound system: stereo (2.0)
- Power: 10 W
- 2 x 8 W and 2.25" full range speakers
- Passive radiators: 1 membrane
- Frequency response: 40 Hz ~ 18 kHz
- THD: < 1%
- Signal/noise ratio: > 90 dB
- Far-Field and Near-Field system
- 2 omnidirectional microphones
- Unlimited alarms that can be set with Alexa
- Two alarms that can be set on the device
- Snooze function
- Bluetooth 5.0, class 2
- Frequency band: 2.4 GHz
- Maximum output power: < 20.00 dBm
- Supported Bluetooh protocols: HSP / HFP / A2DP / AVRCP
- Up to 10 m range
- Standard: 802.11 b/g/n
- Frequency band: 2.4 GHz
- Maximum output power: < 20.00 dBm
- Supported security protocols: WEP/WPA-PSK/WPA2-PSK/WAPI
- Encryption standards: WEP64/WEP128/TKIP/AES
- Compatible wireless audio systems: Airplay, DLNA, Spotify Connect
- Multiroom technology
- 3.5 mm audio-in (analogue stereo input)
- AC/DC power adapter: 100 ~ 240 V/ 50 ~ 60 Hz
- Device adapter: DC
- Plug for electric socket: Europlug
- Power cable length: 150 cm
- Power consumption at medium volume: 2 Wh
- Power consumption at full volume: 6 Wh
- High definition LED display with adjustable brightness
- Timer with auto turn-off function
- 5 V, 2 A USB charging port for external devices
- 5 W Qi standard wireless charger
- Wooden cabinet speaker
- Smart Speaker Wake Up
- AC/DC power adapter (Europlug)
- Quick guide
- Change function
- Volume -
- Volume +
- Mute microphone
- Alarm 1
- Alarm 2
- Time setup
- Wireless charger
- USB charging port
- 3.5 mm audio-in
- Power connector
Switching on and off the device
To switch on your Smart Speaker Wake Up connect the power adapter (provided with the product) to the Power connector (18) on the back of the device. Press and hold On/Off (1) for 2 seconds. At this point, the display lights up.
Press and hold On/Off (1) for 2 seconds to switch off your device. You will hear a confirmation sound and the display will turn off.
NOTE: Take into account that the alarms won't sound if the device is off.
You can alternatively turn off the device display by pressing On/Off (1). If you want to turn it on, press the very same button once again. This way, the speaker continues working normally and you can go on listening to music. The display lights up when an alarm sounds.
Press Time setup (13) to adjust the display brightness.
Press and hold the Change function (2) for 10 seconds to reset the device to factory settings.
Listen to your favourite music using the playback control buttons of your Smart Speaker Wake Up.
Press Play/Pause (8) to play or pause the song you are listening to.
Press Volume - (3) or Volume + (4) to adjust the volume level according to your preferences.
To switch to the previous or next track, press Back (9) or Next (10).
Press Change function (2) button to choose between the playback modes of your Smart Speaker Wake Up. The options will appear on screen as follows:
Wi-Fi - Bluetooth - Aux
Before using the speaker, you need to download the Multiroom Wi-Fi app to your device. If you have an Android device, download the app from Google Play. If you have an iOS device, you can get it from the App Store. With this app you can set up and manage all compatible Wi-Fi speakers.
Enable Wi-Fi on the speaker and wait until setup mode is enabled (you will hear a confirmation message). If you do not hear this message, press and hold Change Function (2) for 2 seconds to enable it.
Open the app and select “Add device” on the lower part of the screen to start the setup. If you have already added a speaker, you can add another one by pressing the + symbol at the top of the screen.
Select the model of your device from the drop-down menu and press ”Connect Speaker”. Access the Wi-Fi settings on your smartphone or tablet and connect to the speaker network. The network is called Smart Speaker_XXXX. Once connected, return to the app to continue.
NOTE: If your device works with Android 7.0 or higher, you may receive a notification to enable the Wi-Fi connection at this point. If you do not accept it, the setup may fail.
Once the speaker has been detected, you have to choose the Wi-Fi network you want to connect to and enter the password. After pressing “Continue”, the app will set up the device. It will display a message once the process has been completed.
After that, you only have to give your speaker a name and set up an Amazon account. To do this, log in with your Amazon username and password, and choose the language you want for your interactions with Alexa.
NOTE: This final step is optional. You will only need to do this if you want to interact with Alexa. The other device functions can be used without logging in to Amazon.
On the main screen, scroll to the right 2 times to access the main menu. There are 4 modes available:
With this option you can access the previously saved songs. This list has been conceived to add and delete songs easily.
Playback the songs you have stored on your device. In order to make it easier, songs are sorted out into Albums and Artists. Furthermore, you will be able to create your own playlists and access the last played tracks.
If your device has a USB port or microSD slot, you can access the contents of these external storage units and select which song you want to play. If you access the additional information of a certain music track, you will be able to add this song to your favourites or to the current playlist as well as take a look at the additional information.
You can also access your DLNA servers from this section to play music over your Wi-Fi network. You will be able to play music stored on computers, hard drives or routers, which are compatible with this technology.
Use this option to enjoy a wide selection of streaming radio stations. You can listen to music from all around the world as well as to your favourite sports programmes.
Use your phone, tablet or computer as a remote control via Spotify. Access spotify.com/es/connect to learn how.
Use this option or access the official Spotify app to listen to your favourite music via Spotify on your Smart Speaker. Click on "Available Devices" at the bottom to open the list of devices while the speaker is playing a song.
Stream music using AirPlay
Transfer music from your Apple devices using AirPlay. To do this, enable this feature on your Mac, iOS device, or Apple TV, and select the Smart Speaker you want to send the content to. Remember that both devices must be connected to the same Wi-Fi network in order for this option to work. You can get more information here.
Transfer music from Windows 10
Access Windows settings, "Devices" and click on "Add Bluetooth or other device". Select "Other" and wait for the Smart Speaker to be added to the list. Select it and wait until the connection is set up correctly.
Now you can stream your music to your speaker. To do this, select the songs you want to send from the file explorer, open the context menu (right click) and select "Transmit to device". To finish, you just have to select your speaker from the list.
Transfer music from Linux
Open the terminal and enter the following commands to install the pulseaudio-dlna package. It enables streaming to other devices using the DLNA protocol:
sudo add-apt repository ppa:qos/pulseaudio-dlna
sudo apt-get update
sudo apt-get install pulseaudio-dlna
Access your operating system's audio manager and select the Smart Speaker as audio output.
If you have several Energy Sistem Wi-Fi speakers, you can connect them all to the same network and create stereo sound systems or play music separately through each speaker. To do this, first set up all your speakers pressing the + symbol on the upper part of the Multiroom Wi-Fi app and follow the steps.
Once connected, press and hold the speaker name and release it on the main device name to create speaker groups and listen to your music simultaneously.
Note: The speaker performance in Multiroom mode, as well as the number of speakers working at the same time, depend directly on the router, the distance to the access point, and the used transmitter. It is recommended to connect a maximum of 10 loudspeakers in synchronized mode to ensure proper operation.
This Multiroom mode is set by default. Each speaker plays music independently. You can control each of them using the app or interacting directly with the device. You will know that this playback mode is enabled by looking the app. Each device will have one separate line.
The synchronized Multiroom mode enables to play the same song on all speakers at the same time. To set this playback mode, press and hold the name of the device you prefer and drag it to the speaker name you want to connect it to. Wait a few seconds and you will see that both devices are synchronized. The synchronized tracks will appear on the app screen. This way, you will create groups comprising a main speaker and the rest of the speakers.
You can assign a different channel to each speaker:
- L = Left channel
- R = Right channel
- LR = Stereo
The synchronized mode remains enabled until it is disabled manually, so if you press Change function (2) to change the playback mode on the main speaker, for instance, to Bluetooth mode, you will be able to stream the contents via Bluetooth to all synchronized speakers.
To enable the individual Multiroom mode once again, you only have to select the synchronized secondary speaker and drag it out of the group. Wait a few seconds, until the synchronized mode is disabled.
Once the Wi-Fi initial setup has been completed, you will be able to interact with Alexa by saying her name or pressing Alexa (7). Ask a question or make a request while the Alexa icon glows cyan. Alexa will answer you automatically once you've finished talking. Press Mute microphone (5) to mute the microphones and avoid activating Alexa. The Alexa icon will glow red. Press the very same button once again to activate the microphones.
To customise your Amazon Alexa experience and add Skills to enjoy more options, you will need the Amazon Alexa app for Android or iOS. You can also access it through your web browser: alexa.amazon.com.
If Alexa is not set up correctly during the speaker initial setup, you can always log into your Amazon account and select the language to interact with Alexa from the Amazon Alexa tab of the side menu.
Bluetooth (BT) mode
To pair your speaker with a Bluetooth device, press Change function (2) until Bluetooth mode is enabled. At this point, access the Bluetooth settings on your device and search for the Smart Speaker 3 Wake Up among the detected devices. Once selected, the connection will be established immediately. You will hear a sound that confirms both devices have been paired correctly.
Your Smart Speaker Wake Up will pair automatically with the last connected device when you switch it on once again, provided that Bluetooth is enabled on your device. Press and hold Change function (2) for 2 seconds to disconnect the current device and pair it with a new one.
Auxiliary audio input (AUX)
Your Smart Speaker Wake Up features a 3.5 mm audio-in (17) to connect your music player using the provided 3.5 mm jack audio cable.
Please take into account that you will have to use the external source device connected to your speaker to control music playback (change track, pause playback or adjust volume).
Clock and alarms
Setting the time
Once the initial Wi-Fi setup is complete, your Smart Speaker Wake Up will automatically update the time.
If you want to change the time, press and hold Time setup (13) for 2 seconds and you will see the hour digits flashing. Press Back (9) or Next (10) to select the hour. Press Time setup (13) again to confirm. Repeat the steps above to select the minutes.
If you wish to change the time format (12 h/24 h), press and hold Time setup (13) for 2 seconds during the clock setting process to select the preferred time format. You will see "AM" or "PM" appearing and disappearing on the screen.
Setting an alarm
Your Smart Speaker Wake Up features 2 alarms that can be set separately.
To set up an alarm, press and hold Alarm 1 (11) or Alarm 2 (12) for 2 seconds. You will see the hour digits and the clock symbol with the number of the selected alarm flashing. Press Back (9) and Next (10) to select the hour. Press Alarm 1 (11) or Alarm 2 (12) to confirm. Repeat the steps above to select the minutes.
Once the minutes have been selected, the display will let you choose the number of the alarm. Press Back (9) and Next (10) to select the alarm you prefer. Press Alarm 1 (11) or Alarm 2 (12) to confirm.
Press Alarm 1 (11) and/or Alarm 2 (12) to enable and select one of the alarm modes available on your Smart Speaker Wake Up. The options will appear on screen as follows:
Alarm ON - Repeat alarm - Alarm OFF
The volume of the alarm will increase gradually. Stop the alarm by pressing any button, except the Time setup (13) and Snooze (14) buttons. If you press these buttons, the alarm will sound once again after 10 minutes.
Note: If you have set the alarm via Alexa, press Alexa (7) or Play/Pause (8) to stop the alarm.
You can activate this feature in any mode except for Clock mode. To do so, press Snooze (14) several times until reaching the desired time (30, 60, 120 and 180 minutes). When the selected time has elapsed, the music stops automatically and your Smart Speaker Wake Up returns to Clock mode.
Press Snooze (14) until you see OFF appear on screen to deactivate the timer.
Charging a device wirelessly
You can use wireless charging technology to charge the battery of your Qi compatible devices. To do so, place the device on the Wireless charger (15). You will find it in the upper centre of the device.
USB charging port
The device has a 5 V and 2 A USB charging port (16) to charge your external devices using a USB cable.
You can adjust the display brightness to your preferences. Press Time setup (13) to choose one of the brightness levels.
Selecting the language
You can change the speaker language using the Multiroom Wi-Fi app. To access the speaker settings, press the Settings icon on the speaker right upper corner:
Then, select "Speaker info" and the menu to select the speaker language will appear. There are two languages available: English and Spanish.
To select another language to interact with Alexa, access the speaker side menu and click on the Amazon Alexa tab. Click on the gear icon on the upper right corner to access the settings.
Mimimum router requirements
In order for the speakers to work via Wi-Fi correctly, the router of your private network must fulfil the following requirements:
- It must work with a 2.4 GHz Wi-Fi band. The Multiroom system is not compatible with 5 GHz Wi-Fi bands.
- The selected network must use a WEP/WPA-PSK /WPA2-PSK/WAPI security protocol with WEP64/WEP128/TKIP/AES encryption.
- The selected network must enable the SSID broadcast.
Considerations related to advanced router settings that can cause problems:
- Assign static IP addresses.
- Filter the connections by MAC addresses.
- The router doesn't have access to the Internet. If you need to set up an access code from an Internet browser to access the Internet, it won't be possible to set up the speaker and connect to this type of routers.
Network environments with high levels of noise or a low performance level between router and speaker can result in mistakes that affect settings. Please verify that both the speaker and the router are not far away from each other and that the Wi-Fi channel is not overflowed.
Energy Sistem Technology, S.A. is liable for any lack of conformity that exists at the time the goods are purchased during a period of 36 months. Batteries are excluded from the 36-month warranty, having a warranty period of 24 months.
This warranty covers any defects in workmanship or materials and does not cover any product failure due to accidents, misuse or alteration made by an unauthorized person.
The special 36-month warranty is valid for the European Union. For other countries please refer to your specific legislation or your local distributor.
Please visit http://www.energysistem.com/en/support and select your product to view the FAQ (Frequently Asked Questions), user manual, quick guide, drivers and updates available as well as to submit a query to our Technical Support or manage the warranty.
You may also contact the distributor that sold the product by presenting the purchase receipt or invoice.
Important: This warranty does not cover any damage or loss of data stored on warranty products. Therefore, Energy Sistem's Technical Support will not assume any loss of the above mentioned information. In this respect it is recommended that you make a backup of your data and remove any personal data from the product internal memory before you send it or send it only with the original data.
Trademarks. All company, brand and product names are trademarks or registered trademarks of their respective companies. Specifications are subject to change without notice.
© 2019 by Energy Sistem Technology, S.A. All rights reserved.
Declaration of conformity
Issuer's name: Energy Sistem Technology, S.A. - CIF: A53107488
Address: Address: C/ Calpe, 1 - 03509 Finestrat - Alicante (Spain)
Tel: + 34 966 830 324
We declare under our own exclusive responsibility that the product:
Description: Wi-Fi speaker
Brand: Energy Sistem
Model: Smart Speaker Wake Up
Manufacturer: Energy Sistem Technology, S.A.
Manufacturing country: China
referred to in this declaration is in compliance with the following European Union directives:
Directive 2014/53/EU (RED)
and essential norms and standards
EN 60065:2014(Eight Edition)+A11:2017
EN 301 489-01 V2.1.1: 2017-02
EN 301 489-3 V2.1.1:2017-03
EN 301 489-17 V3.1.1: 2017-02
EN 300 328 V2.1.1: 2016-11
EN 303 345 V.1.1.7:2017-03
in conformity with the provisions of the Directive 2014/53/EU of the European Parliament and of the Council of 16th April 2014.
Finestrat, 1st November 2019
Javier Álvarez Rodríguez
Innovation and Technology Director